| description abstract | Detailed numerical and experimental investigations of film cooling effectiveness were conducted on the blade tips of the first rotor row pertaining to a threestage research turbine. Four different blade tip ejection configurations were utilized to determine the impact of the hole arrangements on the film cooling effectiveness. Plane tip with tip hole cooling, squealer tip with tip hole cooling, plane tip with pressure side (PS) edge compound angle hole cooling, and squealer tip with PSedge compound angle hole cooling. To avoid rotor imbalance, every pair is installed radially. Film cooling effectiveness measurements were performed for three blowing ratios (M) of 0.75, 1.25, and 1.75. Film cooling data was also obtained for three rotational speeds; 3000 rpm (reference condition), 2550 rpm and 2000 rpm. Film cooling measurements were performed using pressure sensitive paint (PSP) technique. In a parallel effort, extensive numerical investigations of the above configurations were performed to give a better view of flow behavior using a commercially available code. The experimental investigations were performed in the threestage multipurpose turbine research facility at the Turbomachinery Performance and Flow Research Laboratory (TPFL), Texas A&M University. | |
