Show simple item record

contributor authorChen, Ziqian
contributor authorDragsted, Janne
contributor authorFurbo, Simon
contributor authorPerers, Bengt
contributor authorFan, Jianhua
date accessioned2017-05-09T01:23:29Z
date available2017-05-09T01:23:29Z
date issued2015
identifier issn0199-6231
identifier othersol_137_03_031017.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/159615
description abstractA mathematical model simulating the emptying behavior of a pressurized solar collector loop with solar collectors with a good emptying behavior is developed and validated with measured data. The calculated results are in good agreement with the measured results. The developed simulation model is therefore suitable to determine the behavior of a solar collector loop during stagnation. A volume ratio R, which is the ratio of the volume of the vapor in the upper pipes of the solar collector loop during stagnation and the fluid content of solar collectors, is introduced to determine the mass of the collector fluid pushed into the expansion vessel during stagnation, Min. A correlation function for the mass Min and the volume ratio R for solar collector loops is obtained. The function can be used to determine a suitable size of expansion vessels for solar collector loops.
publisherThe American Society of Mechanical Engineers (ASME)
titleBehavior of a Solar Collector Loop During Stagnation
typeJournal Paper
journal volume137
journal issue3
journal titleJournal of Solar Energy Engineering
identifier doi10.1115/1.4027933
journal fristpage31017
journal lastpage31017
identifier eissn1528-8986
treeJournal of Solar Energy Engineering:;2015:;volume( 137 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record