| description abstract | Significant changes have been incorporated in design limits for pressurized vessels in Section VIII, Division 3 of the ASME Code, starting in 2007. There is now a local damagemechanics based strainexhaustion limit as well as a separate global plastic collapse limit. In addition, Code Case 2564 (Sec. VIII, Div 3) has recently been approved to address impulsively loaded vessels. Recent studies (Nakamura, T., Kaguchi, H., and Kubo, S., 2000, “Failure Strain of Thin Cylindrical Vessel Subjected to Dynamic Internal Pressure,†Design and Analysis of Pressure Vessels and Piping, Vol. 399, R. Baliga, ed., pp. 47–54 and Duffey, T. A., 2011, “Plastic Instabilities in Spherical Vessels for Static and Dynamic Loading,†ASME J. Pressure Vessel Technol., 133(5), p. 051210) have shown that local strain limits play a particularly important role for these impulsively loaded vessels. In this paper, the new local strainexhaustion procedure, originally intended for staticpressureloaded vessels, is evaluated for adequacy in conservatively predicting failure for impulsively loaded vessels. Based upon symmetrically loaded cylindrical shell geometry, it is found that direct extension of the new local failure rules in the ASME Code to impulsively loaded vessels is unconservative. However, a hoopstrain local failure criterion predicts failures reasonably well. | |
