| description abstract | This article investigates the effect of fiber orientation on forming and failure behaviors of a preconsolidated woven selfreinforced polypropylene (SRPP) composite during the stampforming process. Specimens with different aspect ratios were employed to study their formability during forming through a hemispherical punch in an open die configuration. The strain evolution in specimens was captured using a realtime strain measurement system (the aramis). A forming limit diagram (FLD), inspired from metal forming, was constructed to investigate the failure onset in the woven composite. The FLD revealed dominant failure mechanisms in [0 deg,90 deg] specimens were yarn splitting and fiber fracture as depicted by optical microscopy. A modified FLD was proposed to investigate failure mechanisms in [45 deg,−45 deg] samples. It was shown that delamination and intralaminar shear are the main causes of failure in this set of specimens. The outcomes of this study suggest that by changing forming parameters, such as fiber orientation, boundary condition, and aspect ratio, the formability of a preconsolidated SRPP can be improved. These results show the possibility of producing costeffective, flawless, and fully recyclable products from consolidated woven composites. The proposed criterion can accurately predict failure in a woven composite by considering the combined strain interactions. This is reflected in the implementation of induced deformation modes and strain history into the failure criterion, making it a practical measure for rapid manufacturing techniques, such as stamping. The novel pathdependent failure criterion, introduced in this study, attempts to fill the gap for a reliable and accurate failure measure for woven composites. | |
