Show simple item record

contributor authorEL Hasadi, Yousef M. F.
contributor authorKhodadadi, J. M.
date accessioned2017-05-09T01:19:46Z
date available2017-05-09T01:19:46Z
date issued2015
identifier issn0022-1481
identifier otherht_137_07_072301.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/158506
description abstractDevelopment of the solid–liquid interface, distribution of the particle concentration field, as well as the development of thermosolutal convection during solidification of colloidal suspensions in a differentially heated cavity are investigated. The numerical model is based on the onefluid mixture approach combined with the singledomain enthalpy porosity model for phase change, and it is implemented in fluent software package. The linear dependence of the liquidus and solidus temperatures with the concentration of the nanoparticles was assumed. A colloidal suspension consisting of water and copper or alumina nanoparticles were considered. In the current investigation, the nanoparticle size selected was 5 and 2 nm. The suspension was solidified unidirectionally inside a square differentially heated cavity that was cooled from the left side. It was found that the solid–liquid interface changed its morphology from a planar shape to a dendritic one as the solidification process proceeds in time, due to the constitutional supercooling that resulted from the increased concentration of particles at the solid–liquid interface rejected from the crystalline phase. Initially, the flow consisted of two vortices rotating in opposite directions. However, at later times, only one counter clockwise rotating cell survived. Changing the material of the particle to alumina resulted in crystallized phase with a higher concentration of particles. If it is compared to that of the solid phase resulted from freezing the copper–water colloidal suspension. Decreasing the segregation coefficient destabilizes the solid–liquid interface and increases the intensity of the convection cell with respect to that of the case of no particle rejection. At slow freezing rates, the resulting crystal phase consisted of lower particle content compared to the case of higher freezing rate.
publisherThe American Society of Mechanical Engineers (ASME)
titleNumerical Simulation of Solidification of Colloids Inside a Differentially Heated Cavity
typeJournal Paper
journal volume137
journal issue7
journal titleJournal of Heat Transfer
identifier doi10.1115/1.4029035
journal fristpage72301
journal lastpage72301
identifier eissn1528-8943
treeJournal of Heat Transfer:;2015:;volume( 137 ):;issue: 007
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record