Show simple item record

contributor authorLiang, Fuyou
contributor authorOshima, Marie
contributor authorHuang, Huaxiong
contributor authorLiu, Hao
contributor authorTakagi, Shu
date accessioned2017-05-09T01:15:26Z
date available2017-05-09T01:15:26Z
date issued2015
identifier issn0148-0731
identifier otherbio_137_10_101011.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/157195
description abstractFree outflow boundary conditions have been widely adopted in hemodynamic model studies, they, however, intrinsically lack the ability to account for the regulatory mechanisms of systemic hemodynamics and hence carry a risk of producing incorrect results when applied to vascular segments with multiple outlets. In the present study, we developed a multiscale model capable of incorporating global cardiovascular properties into the simulation of blood flows in local vascular segments. The multiscale model was constructed by coupling a threedimensional (3D) model of local arterial segments with a zeroonedimensional (01D) model of the cardiovascular system. Numerical validation based on an idealized model demonstrated the ability of the multiscale model to preserve reasonable pressure/flow wave transmission among different models. The multiscale model was further calibrated with clinical data to simulate cerebroarterial hemodynamics in a patient undergoing carotid artery operation. The results showed pronounced hemodynamic changes in the cerebral circulation following the operation. Additional numerical experiments revealed that a standalone 3D model with free outflow conditions failed to reproduce the results obtained by the multiscale model. These results demonstrated the potential advantage of multiscale modeling over singlescale modeling in patientspecific hemodynamic studies. Due to the fact that the present study was limited to a single patient, studies on more patients would be required to further confirm the findings.
publisherThe American Society of Mechanical Engineers (ASME)
titleNumerical Study of Cerebroarterial Hemodynamic Changes Following Carotid Artery Operation: A Comparison Between Multiscale Modeling and Stand Alone Three Dimensional Modeling
typeJournal Paper
journal volume137
journal issue10
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4031457
journal fristpage101011
journal lastpage101011
identifier eissn1528-8951
treeJournal of Biomechanical Engineering:;2015:;volume( 137 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record