Show simple item record

contributor authorFadida, Refael
contributor authorRittel, Daniel
contributor authorShirizly, Amnon
date accessioned2017-05-09T01:14:37Z
date available2017-05-09T01:14:37Z
date issued2015
identifier issn0021-8936
identifier otherjam_082_04_041004.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/156927
description abstractThe mechanical properties of additively manufactured (AM) dense and porous Ti6Al4V specimens were investigated under static and dynamic compression. The fully dense specimens were fabricated using laser melting process. The porous specimens contained spherical pores with full control on the geometry and location of the pores. The laser processed dense material exhibited superior strength in the static and dynamic tests, compared to the same conventional material, but the ductility of the two was comparable. Single pore specimens exhibited a linear relationship between the load and the pore volume fraction. The comparison between singleand doublepore specimens, at identical volume fractions, revealed the importance of the pores' orientation with respect to the applied load.
publisherThe American Society of Mechanical Engineers (ASME)
titleDynamic Mechanical Behavior of Additively Manufactured Ti6Al4V With Controlled Voids
typeJournal Paper
journal volume82
journal issue4
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4029745
journal fristpage41004
journal lastpage41004
identifier eissn1528-9036
treeJournal of Applied Mechanics:;2015:;volume( 082 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record