Show simple item record

contributor authorAbd
contributor authorAbouel
contributor authorEmara, K. M.
contributor authorAhmed, S. M.
date accessioned2017-05-09T01:12:50Z
date available2017-05-09T01:12:50Z
date issued2014
identifier issn0742-4787
identifier othertrib_136_01_011106.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/156406
description abstractThe paper reports the influence of carburizing on the slurry erosion behavior of AISI 5117 steel using a whirlingarm rig. The microstructure and hardness profile of the surface layer of carburized steel were investigated. For characterizing the slurry damage process and for better understanding of material removal at different angles, scanning electron microscope (SEM) images at different locations on eroded surface using stepwise erosion combined with relocation SEM were presented. The study is also focused on studying the erosion wear resistance properties of AISI 5117 steel after carburizing at different impact angles. The tests were carried out with particle concentration of 1 wt. %, and the impact velocity of slurry stream was 15 m/s. Silica sand has a nominal size range of 250 – 355 خ¼m was used as an erodent. The results showed that, carburizing process of steel increased the erosion resistance and hardness compared with untreated material for all impact angles. The erosion resistance of AISI 5117 steel increases by 75%, 61%, 33%, 10% at an impact angle of 30 deg, 45 deg, 60 deg, and 90 deg, respectively, as result of carburizing, i.e., the effectiveness of carburizing was the highest at low impact angles. Treated and untreated specimens behaved as ductile material, and the maximum mass loss appeared at impact angle of 45 deg. Plough grooves and cutting lips appeared for acute impact angle, but the material extrusions were for normal impact angles. The erosion traces were wider and deeper for untreated specimens comparing by the shallower and superficial ones for the carburized specimens. Chipping of the former impact sites by subsequent impact particles plays an important role in developing erosion.
publisherThe American Society of Mechanical Engineers (ASME)
titleEffect of Impact Angle on Slurry Erosion Behavior and Mechanisms of Carburized AISI 5117 Steel
typeJournal Paper
journal volume136
journal issue1
journal titleJournal of Tribology
identifier doi10.1115/1.4025874
journal fristpage11106
journal lastpage11106
identifier eissn1528-8897
treeJournal of Tribology:;2014:;volume( 136 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record