Show simple item record

contributor authorDing, Huafeng
contributor authorFeng, Zemin
contributor authorFu, Hongye
contributor authorWang, Yuanyuan
date accessioned2017-05-09T01:10:54Z
date available2017-05-09T01:10:54Z
date issued2014
identifier issn1942-4302
identifier otherjmr_006_03_034502.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/155762
description abstractThe gripper lifting track of a forging manipulator should keep as close to a straight line as possible, especially for the manufacturing of long or highprecision forged pieces. However, the lifting tracks of most forging manipulators are arc, such as DANGO & DIENENTHAL in Siegen (DDS) and SchloemannSiemagAG Meer (SMS Meer). This paper proposes a new forging manipulator whose gripper lifting track is exactly a straight line. First, a planar 3degreesoffreedom (3DOF) mechanism whose gripper moves along a straight line is proposed. Second, replace the lifting drive of the planar mechanism with a parallel mechanism which only generates one translation, and obtain a majormotion mechanism. Finally, a new forging manipulator is constructed based on this majormotion mechanism. The new manipulator has the advantages of exactly straight lifting, high loadbearing capacity, and decoupling the lifting from other motions. It not only can improve forging precision for long axial forged pieces but also make coordinated control of two forging manipulators much easier.
publisherThe American Society of Mechanical Engineers (ASME)
titleConceptual Design of an Exactly Straight Lifting Forging Manipulator
typeJournal Paper
journal volume6
journal issue3
journal titleJournal of Mechanisms and Robotics
identifier doi10.1115/1.4027238
journal fristpage34502
journal lastpage34502
identifier eissn1942-4310
treeJournal of Mechanisms and Robotics:;2014:;volume( 006 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record