| contributor author | Norazman, Farhana | |
| contributor author | Hopkinson, Neil | |
| date accessioned | 2017-05-09T01:10:15Z | |
| date available | 2017-05-09T01:10:15Z | |
| date issued | 2014 | |
| identifier issn | 1087-1357 | |
| identifier other | manu_136_06_061006.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/155552 | |
| description abstract | High speed sintering (HSS) is an additive manufacturing (AM) process that creates parts by sintering powder particles using inkjet and infrared (IR) lamp technology rather than laser systems employed in laser sintering (LS). This research investigated the effects of machine parameters (lamp speed, bed temperature) and the addition of fumed silica flow agent on the tensile properties of thermoplastic elastomer (TPE) parts processed using HSS. The results showed improved elongation at break (EaB) values by a factor of more than 2أ— compared to reported values for LS of the same TPE. At constant parameters, improved tensile strength and tensile modulus were observed with the addition of flow agent into the sintering mixture. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Effect of Sintering Parameters and Flow Agent on the Mechanical Properties of High Speed Sintered Elastomer | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 6 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.4028482 | |
| journal fristpage | 61006 | |
| journal lastpage | 61006 | |
| identifier eissn | 1528-8935 | |
| tree | Journal of Manufacturing Science and Engineering:;2014:;volume( 136 ):;issue: 006 | |
| contenttype | Fulltext | |
