| contributor author | Hynynen, Katja M. | |
| contributor author | Ratava, Juho | |
| contributor author | Lindh, Tuomo | |
| contributor author | Rikkonen, Mikko | |
| contributor author | Ryynأ¤nen, Ville | |
| contributor author | Lohtander, Mika | |
| contributor author | Varis, Juha | |
| date accessioned | 2017-05-09T01:10:08Z | |
| date available | 2017-05-09T01:10:08Z | |
| date issued | 2014 | |
| identifier issn | 1087-1357 | |
| identifier other | manu_136_04_044503.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/155517 | |
| description abstract | Chatter is an unfavorable phenomenon in turning operation causing poor surface quality. Active chatter elimination methods require the chatter to be detected before the control reacts. In this paper, a chatter detection method based on a coherence function of the acceleration of the tool in the x direction and an audio signal is proposed. The method was experimentally tested on longitudinal turning of a stock bar and facing of a hollow bar. The results show that the proposed method detects the chatter in an early stage and allows correcting control actions before the chatter influences the surface quality of the workpiece. The method is applicable both to facing and longitudinal turning. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Chatter Detection in Turning Processes Using Coherence of Acceleration and Audio Signals | |
| type | Journal Paper | |
| journal volume | 136 | |
| journal issue | 4 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.4026948 | |
| journal fristpage | 44503 | |
| journal lastpage | 44503 | |
| identifier eissn | 1528-8935 | |
| tree | Journal of Manufacturing Science and Engineering:;2014:;volume( 136 ):;issue: 004 | |
| contenttype | Fulltext | |
