Show simple item record

contributor authorLorenzini, G.
contributor authorBiserni, C.
contributor authorEstrada, E. D.
contributor authorIsoldi, L. A.
contributor authordos Santos, E. D.
contributor authorRocha, L. A. O.
date accessioned2017-05-09T01:09:30Z
date available2017-05-09T01:09:30Z
date issued2014
identifier issn0022-1481
identifier otherht_136_07_071702.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/155297
description abstractIn the present work constructal design is employed to optimize the geometry of a convective, Yshaped cavity that intrudes into a solid conducting wall. The main purpose is to investigate the influence of the dimensionless heat transfer parameter a over the optimal geometries of the cavity, i.e., the ones that minimize the maximum excess of temperature (or reduce the thermal resistance of the solid domain). The search for the best geometry has been performed with the help of a genetic algorithm (GA). For square solids (H/L = 1.0) the results obtained with an exhaustive search (which is based on solution of all possible geometries) were adopted to validate the GA method, while for H/L ≠ 1.0 GA is used to find the best geometry for all degrees of freedom investigated here: H/L, t1/t0, L1/L0, and خ± (four times optimized). The results demonstrate that there is no universal optimal shape that minimizes the thermal field for all values of a investigated. Moreover, the temperature distribution along the solid domain becomes more homogeneous with an increase of a, until a limit where the configuration of “optimal distribution of imperfectionsâ€‌ is achieved and the shape tends to remain fixed. Finally, it has been highlighted that the GA method proved to be very effective in the search for the best shapes with the number of required simulations much lower (8 times for the most difficult situation) than that necessary for exhaustive search.
publisherThe American Society of Mechanical Engineers (ASME)
titleConstructal Design of Convective Y Shaped Cavities by Means of Genetic Algorithm
typeJournal Paper
journal volume136
journal issue7
journal titleJournal of Heat Transfer
identifier doi10.1115/1.4027195
journal fristpage71702
journal lastpage71702
identifier eissn1528-8943
treeJournal of Heat Transfer:;2014:;volume( 136 ):;issue: 007
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record