Show simple item record

contributor authorPaul, Tanmoy
contributor authorSeal, Mrinal
contributor authorBanerjee, Dipali
contributor authorGanguly, Saibal
contributor authorKargupta, Kajari
contributor authorSandilya, Pavitra
date accessioned2017-05-09T01:09:03Z
date available2017-05-09T01:09:03Z
date issued2014
identifier issn2381-6872
identifier otherfc_011_04_041001.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/155133
description abstractDifferent experimental and analytical techniques namely steady state galvanometric study and electrochemical impedance spectroscopy (EIS) are employed to generate rule sets for identification of the acid drying and dilution phenomena in a phosphoric acid fuel cell (PAFC). The slope of steady state current versus voltage is used as a performance marker. A new parameter خ”, which signifies the net moisture transport in PAFC, is introduced and evaluated from the experimental data to locate the regimes of electrolyte dilution and drying. Based on these two parameters, the performance of a PAFC is mapped on the plane of operating variables. Performance decay at higher cell temperature and lower humidifier temperature (below 60 آ°C) signifies acid drying; on the contrary the same at lower cell temperature and higher humidifier temperature is attributed to acid dilution. EIS is employed by imposing a sinusoidal potential excitation on steady state DC load and the shift of maximum phase angle position in the frequency spectrum is used as a diagnostic marker. Results show absence of peak in the domain of positive frequency for acid drying condition, while acid dilution causes the peak to be shifted at higher frequency value. Electrochemical timescales estimated from EIS increases by many order of magnitudes compared to that in a normal PAFC, when electrolyte drying occurs. The results obtained from EIS analysis are in agreement with the performance mapping based on galvanometric steady analysis. The results are significant in context of water management and humidity control in a PAFC. The tools and parameters introduced in the present publication show promising potential to map the performance and SOH of a PAFC on the plane of various operating variables. Results and logics revealed are of significance in development of inferential model for the online optimization of PAFC.
publisherThe American Society of Mechanical Engineers (ASME)
titleAnalysis of Drying and Dilution in Phosphoric Acid Fuel Cell (PAFC) Using Galvanometric Study and Electrochemical Impedance Spectroscopy
typeJournal Paper
journal volume11
journal issue4
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4026622
journal fristpage41001
journal lastpage41001
identifier eissn2381-6910
treeJournal of Fuel Cell Science and Technology:;2014:;volume( 011 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record