Show simple item record

contributor authorIto, Akemi
contributor authorMochiduki, Kazuya
contributor authorKikuhara, Koji
contributor authorInui, Masatsugu
contributor authorAkamatsu, Hirotaka
date accessioned2017-05-09T01:08:09Z
date available2017-05-09T01:08:09Z
date issued2014
identifier issn1528-8919
identifier othergtp_136_12_121503.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/154859
description abstractIt is known that a cylinderbore shape affects engine oil consumption. This study aimed clarifying the conformability of an oilring under engine operating condition. Oil film thickness at the sliding surface of oilring rails was measured by laser induced fluorescence (LIF) method using optical fiber embedded in the oilring. Findings showed that the piston tilting motion affected oil film thickness. Furthermore, thicker oil film was found at the following rail than that at former rail. It suggested that oil was supplied to the following rail from not only the former ring sliding surface but also somewhere, for example, the oil ring groove.
publisherThe American Society of Mechanical Engineers (ASME)
titleA Study on Measurement of Conformability of the Piston Oil Ring on the Cylinder Bore Under Engine Operating Condition by Laser Induced Fluorescence Method Using Optical Fiber
typeJournal Paper
journal volume136
journal issue12
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4027808
journal fristpage121503
journal lastpage121503
identifier eissn0742-4795
treeJournal of Engineering for Gas Turbines and Power:;2014:;volume( 136 ):;issue: 012
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record