High Fidelity Simulation of the Spray Generated by a Realistic Swirling Flow Injector

Abstract

Practical aeroengine fuel injection systems are highly complicated, combining complex fuel atomizer and air swirling elements to achieve good fuelair mixing and long residence time in order to enhance both the combustion efficiency and stability. While a detailed understanding of the multiphase flow processes occurring in a realistic injector has been limited due to the complex geometries and the challenges in nearfield measurements, high fidelity, first principles simulation offers, for the first time, the potential for a comprehensive physicsbased understanding. In this work, such simulations have been performed to investigate the spray atomization and subsequent droplet transport in a swirling air stream generated by a complex multinozzle/swirler combination. A coupled level set and volume of fluid (CLSVOF) approach is used to directly capture the liquidgas interface and an embedded boundary (EB) method is applied to flexibly handle the complex injector geometry. The ghost fluid (GF) method is also used to facilitate simulations at a realistic fuelair density ratio. Adaptive mesh refinement (AMR) and Lagrangian droplet models are used to efficiently resolve the multiscale processes. To alleviate the global constraint on the time step imposed by the locally activated AMR near liquid jets, a separate AMR simulation focusing on jet atomization was performed for a relatively short physical time and the resulting Lagrangian droplets are coupled into another simulation on a uniform grid at larger timesteps. The high cost simulations were performed at the U.S. Department of Defense high performance computing facilities using over 5000 processors. Experiments at the same flow conditions were conducted at the United Technologies Research Center (UTRC). The simulation details of flow velocity and vorticity due to the interaction of the fuel jet and swirling air are presented. The velocity magnitude is compared with the experimental measurement at two downstream planes. The twophase spray spreading is compared with experimental images and the flow details are further analyzed to enhance the understanding of the complex physics.