Show simple item record

contributor authorDenys J. Mead
date accessioned2017-05-09T01:04:37Z
date available2017-05-09T01:04:37Z
date copyrightAugust, 1971
date issued1971
identifier issn1087-1357
identifier otherJMSEFK-27565#783_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/153735
description abstractThe vibration response of periodic, beam-like structures has conventionally been studied either by transfer matrix or normal mode methods. The latter method becomes unwieldy if the damping and modal density are high, whereas the former method does not lend itself readily to giving physical understanding. It is shown in this paper that a special class of flexural wave groups can exist in periodic structures; an understanding of them permits a ready formulation of the response-calculation problem. The formulation can be applied to both infinite and finite structures, and the amount of damping present may have any value. The method is specially well adapted to studying response due to convected pressure fields and loadings and gives great physical insight. Illustrations are given relating to beams resting at regular intervals on flexible supports and to aeronautical rib-skin structures. Some calculated values of vibration response are presented and discussed and optimum structural configurations are considered.
publisherThe American Society of Mechanical Engineers (ASME)
titleVibration Response and Wave Propagation in Periodic Structures
typeJournal Paper
journal volume93
journal issue3
journal titleJournal of Manufacturing Science and Engineering
identifier doi10.1115/1.3428014
journal fristpage783
journal lastpage792
identifier eissn1528-8935
keywordsWave propagation
keywordsVibration
keywordsPeriodic structures
keywordsDamping
keywordsSkin
keywordsWaves
keywordsDensity AND Pressure
treeJournal of Manufacturing Science and Engineering:;1971:;volume( 093 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record