Show simple item record

contributor authorHotait, M. A.
contributor authorKahraman, A.
date accessioned2017-05-09T01:01:03Z
date available2017-05-09T01:01:03Z
date issued2013
identifier issn1050-0472
identifier othermd_135_10_101005.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/152559
description abstractIn this study, a crack initiation life prediction methodology for the tooth bending fatigue of hypoid gears is proposed. This methodology employs a previously developed finiteelement based hypoid gear root stress model (Hotait et al. 2011, “An Investigation of Root Stresses of Hypoid Gears with Misalignments,â€‌ ASME J. Mech. Des., 133, p. 071006) of facemilled and facehobbed hypoid gears to establish the multiaxial stress time histories within the root fillet regions. These stress time histories are combined with a multiaxial crack initiation fatigue criterion to predict life distributions along roots of the pinion and the gear. The predictions of the multiaxial fatigue model are compared to those from a conventional uniaxial fatigue model to establish the necessity for a multiaxial approach. The model is exercised with an example facemilled hypoid gear set from an automotive application to demonstrate the impact of various misalignments well as the key cutting tool parameters on the resultant tooth bending lives.
publisherThe American Society of Mechanical Engineers (ASME)
titleEstimation of Bending Fatigue Life of Hypoid Gears Using a Multiaxial Fatigue Criterion
typeJournal Paper
journal volume135
journal issue10
journal titleJournal of Mechanical Design
identifier doi10.1115/1.4025024
journal fristpage101005
journal lastpage101005
identifier eissn1528-9001
treeJournal of Mechanical Design:;2013:;volume( 135 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record