Show simple item record

contributor authorLin, Ting
contributor authorKandlikar, Satish G.
date accessioned2017-05-09T00:59:32Z
date available2017-05-09T00:59:32Z
date issued2013
identifier issn0022-1481
identifier otherht_135_3_031703.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/152034
description abstractExperiments were conducted to investigate local heat transfer coefficients and flow characteristics of air flow in a 962 خ¼m inner diameter stainless steel microtube (minichannel). The effects of heat loss, axial heat conduction and viscous heating were systematically analyzed. Heat losses during the experiments with gas flow in small diameter tubes vary considerably along the flow length, causing the uncertainties to be very large in the downstream region. Axial heat conduction was found to have a significant effect on heat transfer at low Re. Viscous heating was negligible at low Re, but the effect was found to be significant at higher Re. After accounting for varying heat losses, viscous heating and axial conduction, Nu was found to agree very well with the predictions from conventional heat transfer correlations both in laminar and turbulent flow regions. No early transition to turbulent flow was found in the present study.
publisherThe American Society of Mechanical Engineers (ASME)
titleHeat Transfer Investigation of Air Flow in Microtubes—Part I: Effects of Heat Loss, Viscous Heating, and Axial Conduction
typeJournal Paper
journal volume135
journal issue3
journal titleJournal of Heat Transfer
identifier doi10.1115/1.4007876
journal fristpage31703
journal lastpage31703
identifier eissn1528-8943
treeJournal of Heat Transfer:;2013:;volume( 135 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record