| contributor author | Hasan Zahir, Md. | |
| contributor author | Suzuki, Toshio | |
| date accessioned | 2017-05-09T00:59:24Z | |
| date available | 2017-05-09T00:59:24Z | |
| date issued | 2013 | |
| identifier issn | 2381-6872 | |
| identifier other | fc_10_2_021006.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/151982 | |
| description abstract | The electrolyte slurry was prepared by mixing Gddoped CeO2(GDC), solvent (ethanol and toluene), a polymer (polyvinyl butyral (PVB)) binder, and a dispersant (an amine system). The slurries were processed by an atomization process and coated on the top of microtubular tubes. A very smooth (with no cracks) electrolyte surface was obtained when the PVB polymer content was 8 wt. % (regular solution); however, a unique natural patchworktype nanoporous grain boundary was obtained when the polymer content was increased to 16 wt. % (excess solution) in the same slurries. The results of this study show that polymers (binders) can be used not only to fabricate a dense electrolyte but also to generate a nanoporous grain boundary. The fabricated electrolytes have been tested for solid oxide fuel cell (SOFC) applications in the intermediatetemperature region. The microtubular cell with dense electrolytes maintained a high performance even under 600 آ°C. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Effects of Polymer Binder in Electrolyte Slurries and Their Microtubular SOFC Applications | |
| type | Journal Paper | |
| journal volume | 10 | |
| journal issue | 2 | |
| journal title | Journal of Fuel Cell Science and Technology | |
| identifier doi | 10.1115/1.4023541 | |
| journal fristpage | 21006 | |
| journal lastpage | 21006 | |
| identifier eissn | 2381-6910 | |
| tree | Journal of Fuel Cell Science and Technology:;2013:;volume( 010 ):;issue: 002 | |
| contenttype | Fulltext | |