Show simple item record

contributor authorChao, Nien
contributor authorDispenza, John A.
contributor authorDeAngelis, Mario
date accessioned2017-05-09T00:57:43Z
date available2017-05-09T00:57:43Z
date issued2013
identifier issn1528-9044
identifier otherep_135_03_031002.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151432
description abstractPotted electronics are becoming more common in precisionguided smart munitions designs due to the requirements for miniaturization and structuralrobustness. In most of these applications, the potted electronics are inactive for most of their lifetime and may be stored without environmental (temperature and humidity) controls for up to 20 yr. The uncontrolled environment for smart munitions however makes the thermal management task especially difficult due to the coefficient of thermal expansion (CTE) mismatch that can exist between the potting material and the electronic components. In this paper, we will do the following: (1) present a methodology being developed for reducing the thermal stresses to the potted electronics used in uncontrolled environments by encapsulating the circuit board assembly (CBA) with a thin polymer layer which has been precisely formed to conform to the imprecisely shaped, aspopulated, CBA. The protective polymer layer will be both flexible and soft enough to protect the CBA components from damage caused by thermal expansion mismatches, but not degrade the structural support that the potting provides during highg force projectile launches, (2) discuss how the protective polymer layer methodology can also be used to lessen incircuit board crosstalk, improve shielding from external RF interference, control tinwhisker growth, and enhance moisture barrier properties and thermal management for CBAs, and (3) demonstrate how to improve the smart munitions survivability under extreme highg applications through the use of syntactic foams and material characterization before and after accelerated temperaturecycling and thermalaging tests.
publisherThe American Society of Mechanical Engineers (ASME)
titleAdvanced Methodologies for Developing Improved Potted Smart Munitions for High G Applications
typeJournal Paper
journal volume135
journal issue3
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4024301
journal fristpage31002
journal lastpage31002
identifier eissn1043-7398
treeJournal of Electronic Packaging:;2013:;volume( 135 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record