Show simple item record

contributor authorJahani, Kambiz
contributor authorMohammadi, Maziar
contributor authorShafii, Mohammad Behshad
contributor authorShiee, Zahra
date accessioned2017-05-09T00:57:39Z
date available2017-05-09T00:57:39Z
date issued2013
identifier issn1528-9044
identifier otherep_135_2_021005.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151413
description abstractCurrently, the thermal management of microelectromechanical systems (MEMS) has become a challenge. In the present research, a micro pulsating heat pipe (MPHP) with a hydraulic diameter of 508 خ¼m, is experimented. The thermal performance of the MPHP in both the transient and steady conditions, the effects of the working fluid (water, silver nanofluid, and ferrofluid), heating power (4, 8, 12, 16, 20, 24, and 28 W), charging ratio (20, 40, 60, and 80%), inclination angle (0 deg, 25 deg, 45 deg, 75 deg, and 90 deg relative to horizontal axis), and the application of magnetic field, are investigated and thoroughly discussed. The experimental results show that the optimum charging ratio for water is 40%, while this optimum for nanofluids is 60%. In most of situations, the nanofluid charged MPHPs have a lower thermal resistance relative to the water charged ones. For ferrofluid charged MPHP, the application of a magnetic field substantially reduces the thermal resistance. This study proposes an outstanding technique for the thermal management of electronics.
publisherThe American Society of Mechanical Engineers (ASME)
titlePromising Technology for Electronic Cooling: Nanofluidic Micro Pulsating Heat Pipes
typeJournal Paper
journal volume135
journal issue2
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4023847
journal fristpage21005
journal lastpage21005
identifier eissn1043-7398
treeJournal of Electronic Packaging:;2013:;volume( 135 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record