Show simple item record

date accessioned2017-05-09T00:57:36Z
date available2017-05-09T00:57:36Z
date issued2013
identifier issn1528-9044
identifier otherep_135_01_010301.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/151395
description abstractWhile the use of metal movabletype printing was first invented in Asia as early as the 13th century, the westernstyle printing press was not fully adopted until centuries later. Since then, printing technologies have evolved dramatically, including recently developed direct printing methodologies such as ink jet printing. Recent advances in threedimensional printing technologies offer myriad new possibilities. Threedimensional fabrication via additive manufacturing is becoming a powerful tool not only for prototyping but also for mass production of commercial devices.
publisherThe American Society of Mechanical Engineers (ASME)
titleIntroduction for JEP Special Issue on Printed Electronics
typeJournal Paper
journal volume135
journal issue1
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4023808
journal fristpage10301
journal lastpage10301
identifier eissn1043-7398
treeJournal of Electronic Packaging:;2013:;volume( 135 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record