Show simple item record

contributor authorAhn, Hojin
date accessioned2017-05-09T00:56:22Z
date available2017-05-09T00:56:22Z
date issued2013
identifier issn0021-8936
identifier otherjam_80_05_051008.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/150921
description abstractOnedimensional wave propagation in granular flow has been investigated using a threedimensional discrete element model (DEM). Cohesionless, dry, smooth, elastic, hard spheres are randomly distributed in a cylinderpiston system with initial granular temperature and solid fraction. Upon a sudden motion of the piston, subsequent wave propagation in granular materials between two ends of the cylinder is numerically simulated. The simulation results of wave speed normalized by the square root of granular temperature are found to be well correlated as a function of solid fraction. Comparison with several analytical works in the literature shows that the simulated wave speed is in good agreement with the wave speed calculated at the isentropic condition but is higher than that at the constant granular temperature condition. Finally the simulation result is employed to describe shock waves observed in the literature. It has been found that, when particles rapidly flow through an orifice, a shock is formed very near the location of the maximum granular temperature. It has also been observed that a shock can be formed even when the flow does not appear to be choked due to its low density upstream of the orifice.
publisherThe American Society of Mechanical Engineers (ASME)
titleWave Propagation in Rapid Granular Flows
typeJournal Paper
journal volume80
journal issue5
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4023538
journal fristpage51008
journal lastpage51008
identifier eissn1528-9036
treeJournal of Applied Mechanics:;2013:;volume( 080 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record