| contributor author | Rene I. Olivares | |
| contributor author | Chunlin Chen | |
| contributor author | Steven Wright | |
| date accessioned | 2017-05-09T00:54:16Z | |
| date available | 2017-05-09T00:54:16Z | |
| date copyright | November, 2012 | |
| date issued | 2012 | |
| identifier issn | 0199-6231 | |
| identifier other | JSEEDO-926222#041002_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/150187 | |
| description abstract | The thermal stability of a molten LiNaK carbonate salt, potentially suitable for thermal energy storage, was studied up to a temperature of 1000 °C. The salt investigated was the eutectic Li2 CO3 –Na2 CO3 –K2 CO3 in the proportions 32.1–33.4–34.5 wt. % and the study was done by simultaneous differential scanning calorimetry (DSC)/thermogravimetric–mass spectrometric (TG–MS) analysis in gas atmospheres of argon, air, and CO2 . It was found that (i) under a blanket gas atmosphere of CO2 the LiNaK carbonate salt is stable up to at least 1000 °C. (ii) In an inert atmosphere of argon, the salt evolves gaseous CO2 soon after melting and begins to decompose at between 710 °C and 715 °C with acceleration in the CO2 evolution rate from the melt. An increase in the rate of weight loss is also observed after 707 °C. (iii) Under a blanket atmosphere of air, the gaseous CO2 evolution from the salt is observed to commence at 530 °C, the onset of decomposition detected by DSC analysis at 601 °C and the rapid rate of weight loss determined by TG analysis at 673 °C. The melting point of the LiNaK carbonate studied was between 400 °C and 405 °C. Thermodynamic modeling with Multi-Phase-Equilibrium (MPE ) software developed in CSIRO Process Science and Engineering indicated that additives such as NaNO3 , KCl, and NaOH lower the melting point of the LiNaK carbonate eutectic, and this was experimentally verified. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | The Thermal Stability of Molten Lithium–Sodium–Potassium Carbonate and the Influence of Additives on the Melting Point | |
| type | Journal Paper | |
| journal volume | 134 | |
| journal issue | 4 | |
| journal title | Journal of Solar Energy Engineering | |
| identifier doi | 10.1115/1.4006895 | |
| journal fristpage | 41002 | |
| identifier eissn | 1528-8986 | |
| keywords | Weight (Mass) | |
| keywords | Temperature | |
| keywords | Melting point | |
| keywords | Potassium | |
| keywords | Sodium | |
| keywords | Thermal stability | |
| keywords | Lithium | |
| keywords | Modeling AND Melting | |
| tree | Journal of Solar Energy Engineering:;2012:;volume( 134 ):;issue: 004 | |
| contenttype | Fulltext | |