| contributor author | Rong Xiang | |
| contributor author | Erik Einarsson | |
| contributor author | Junichiro Shiomi | |
| contributor author | Shigeo Maruyama | |
| date accessioned | 2017-05-09T00:52:20Z | |
| date available | 2017-05-09T00:52:20Z | |
| date copyright | May, 2012 | |
| date issued | 2012 | |
| identifier issn | 0022-1481 | |
| identifier other | JHTRAO-27940#051023_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/149477 | |
| description abstract | Feedstock diffusion and decomposition in the root growth of aligned carbon nanotube (CNT) arrays is discussed. A nondimensional modulus is proposed to differentiate catalyst poisoning controlled growth deceleration from one which is diffusion controlled. It is found that, at present, aligned multiwalled carbon nanotube (MWNT) arrays are usually free of feedstock diffusion resistance. However, for single-walled carbon nanotube (SWNT) arrays, since the intertube distance is much smaller than the mean free path of carbon source (ethanol here), high diffusion resistance in some currently available samples is significantly limiting the growth rate. The method presented here is also able to predict the critical lengths in different chemical vapor deposition (CVD) processes from which CNT arrays begin to meet this diffusion limit, as well as the possible solutions to this diffusion caused growth deceleration. The diffusion of carbon source inside of an array becomes more important when we found ethanol undergoes severe thermal decomposition at the reaction temperature. This means, in a typical alcohol CVD, hydrocarbons and radicals decomposed from ethanol may collide and react with the outer walls of SWNTs before reaching catalyst particles. When flow rate is low and ethanol is thoroughly decomposed, the produced SWNTs contain more soot structures than the SWNTs obtained at higher ethanol flow rate. Understanding the mass transport and reaction inside a SWNT array is helpful to synthesize longer and cleaner SWNTs. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Feedstock Diffusion and Decomposition in Aligned Carbon Nanotube Arrays | |
| type | Journal Paper | |
| journal volume | 134 | |
| journal issue | 5 | |
| journal title | Journal of Heat Transfer | |
| identifier doi | 10.1115/1.4005703 | |
| journal fristpage | 51023 | |
| identifier eissn | 1528-8943 | |
| keywords | Diffusion (Physics) | |
| keywords | Feedstock | |
| keywords | Carbon nanotubes | |
| keywords | Catalysts | |
| keywords | Single-walled nanotubes | |
| keywords | Chemical vapor deposition | |
| keywords | Multi-walled nanotubes | |
| keywords | Ethanol | |
| keywords | Electrical resistance AND Carbon | |
| tree | Journal of Heat Transfer:;2012:;volume( 134 ):;issue: 005 | |
| contenttype | Fulltext | |