Numerical Study of Flow Deflection and Horseshoe Vortices in a Louvered Fin Round Tube Heat Exchanger

Abstract

In louvered fin heat exchangers, the flow deflection influences the heat transfer rate and pressure drop and thus the heat exchanger’s performance. To date, studies of the flow deflection are two-dimensional, which is an acceptable approximation for flat tube heat exchangers (typical for automotive applications). However, in louvered fin heat exchangers with round tubes, which are commonly used in air-conditioning devices and heat pumps, the flow is three-dimensional throughout the whole heat exchanger. In this study, three-dimensional numerical simulations were performed to investigate the flow deflection and horseshoe vortex development in a louvered fin round tube heat exchanger with three tube rows in a staggered layout. The numerical simulations were validated against the experimental data. It was found that the flow deflection is affected by the tubes in the same tube row (intratube row effect) and by the tubes in the upstream tube rows (intertube row effect). Flow efficiency values obtained with two-dimensional studies are representative only for the flow behavior in the first tube row of a staggered louvered fin heat exchanger with round tubes. The flow behavior in the louvered elements of the subsequent tube rows differs strongly due to its three-dimensional nature. Furthermore, it was found that the flow deflection affects the local pressure distributions upstream of the tubes of the downstream tube rows and thus the horseshoe vortex development at these locations. The results of this study are important because the flow behavior is related to the thermal hydraulic performance of the heat exchanger.