Show simple item record

contributor authorHanno Stagge
contributor authorLars Doerrer
contributor authorRalf Benger
contributor authorBeck Hans-Peter
date accessioned2017-05-09T00:51:38Z
date available2017-05-09T00:51:38Z
date copyrightJune, 2012
date issued2012
identifier issn2381-6872
identifier otherJFCSAU-28954#031002_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/149229
description abstractFuel cells consist of single cells that are connected in series to form a stack. This increases output voltage and therefore decreases current-dependent power losses, but the electric current of the stack has to flow through each single cell. In case of an increase of resistance or a failure of just one single cell the whole stack is affected. The failure tolerance of a parallel connection is higher. The serial and parallel connection of single solid oxide fuel cells (SOFC) is compared under the aspects of failure probability, power drop and stress on the single cells. With both a highly linearized and a complex SOFC model simulations have been accomplished of the connection of two single cells in parallel and in serial configuration. Additionally different connection concepts of 16 single cells were examined. Finally, an outlook on different other source or storage technologies for electric energy like batteries and photovoltaic cells is given.
publisherThe American Society of Mechanical Engineers (ASME)
titleIncrease in Availability of Solid Oxide Fuel Cells by Means of Parallel Connection of Cells
typeJournal Paper
journal volume9
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4006048
journal fristpage31002
identifier eissn2381-6910
keywordsElectric potential
keywordsElectrical resistance
keywordsSolid oxide fuel cells
keywordsDrops AND Circuits
treeJournal of Fuel Cell Science and Technology:;2012:;volume( 009 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record