Show simple item record

contributor authorH. Kück
contributor authorThomas Fellner
contributor authorElena Zukowski
contributor authorH. Richter
contributor authorM. Schober
contributor authorJürgen Wilde
contributor authorP. Buckmüller
date accessioned2017-05-09T00:49:24Z
date available2017-05-09T00:49:24Z
date copyrightSeptember, 2012
date issued2012
identifier issn1528-9044
identifier otherJEPAE4-926029#031002_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/148572
description abstractThis investigation is aimed at the modeling of both the fabrication process and the reliability of press-fit interconnections on moulded interconnect devices (MID). These are multifunctional three-dimensional substrates, produced by thermoplastic injection moulding for large-series applications. The assembly process and subsequently the durability of press-fit interconnections has been modeled and proved with a finite element software. Especially, a simulation tool for process optimizations was created and applied. In order to obtain realistic results, a creep model for the investigated base material, a liquid-crystal polymer (LCP), was generated and verified by experiments. Required friction coefficients between metal pin and base material were determined by adapting simulations and experiments. Retention forces of pins pressed into substrate holes during as well after the assembly process, and after temperature loads were predicted by simulations. Additionally, the decreasing extraction forces over time due to creep in the thermoplastic base material have been predicted for different storage temperatures as well with finite element analyses. Following, the numerical results of the process and reliability modeling were verified by experiments. It is concluded that the behavior of the mechanical contact of the pin-substrate system, can be suitably described time- and temperature-dependent.
publisherThe American Society of Mechanical Engineers (ASME)
titleModeling of Thermoplastic Materials for the Process-Simulation of Press-Fit Interconnections on Moulded Interconnected Devices
typeJournal Paper
journal volume134
journal issue3
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4006927
journal fristpage31002
identifier eissn1043-7398
keywordsForce
keywordsTemperature
keywordsStress
keywordsPresses
keywordsModeling
keywordsReliability AND Creep
treeJournal of Electronic Packaging:;2012:;volume( 134 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record