Show simple item record

contributor authorShuguang Huang
contributor authorJoseph M. Schimmels
date accessioned2017-05-09T00:45:59Z
date available2017-05-09T00:45:59Z
date copyrightNovember, 2011
date issued2011
identifier issn1942-4302
identifier otherJMROA6-28017#041006_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/147131
description abstractThis paper presents a new method for the realization of a planar compliant behavior with an elastic mechanism. The mechanisms considered are parallel with symmetric geometry. We show that any planar stiffness matrix can be realized using a parallel mechanism with four line springs connected symmetrically. Among the four springs, two are identical parallel springs equidistant from the stiffness center, and the other two identical springs intersect at the stiffness center. A synthesis procedure based on geometry is presented and mechanism compactness is discussed.
publisherThe American Society of Mechanical Engineers (ASME)
titleRealization of an Arbitrary Planar Stiffness With a Simple Symmetric Parallel Mechanism
typeJournal Paper
journal volume3
journal issue4
journal titleJournal of Mechanisms and Robotics
identifier doi10.1115/1.4004894
journal fristpage41006
identifier eissn1942-4310
keywordsSprings
keywordsStiffness AND Mechanisms
treeJournal of Mechanisms and Robotics:;2011:;volume( 003 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record