Show simple item record

contributor authorOdne S. Burheim
contributor authorJon G. Pharoah
contributor authorHannah Lampert
contributor authorPreben J. S. Vie
contributor authorSigne Kjelstrup
date accessioned2017-05-09T00:44:42Z
date available2017-05-09T00:44:42Z
date copyrightApril, 2011
date issued2011
identifier issn2381-6872
identifier otherJFCSAU-28947#021013_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146508
description abstractWe report the through-plane thermal conductivities of the several widely used carbon porous transport layers (PTLs) and their thermal contact resistance to an aluminum polarization plate. We report these values both for wet and dry samples and at different compaction pressures. We show that depending on the type of PTL and the existence of residual water, the thermal conductivity of the materials varies from 0.15 W K−1 m−1 to 1.6 W K−1 m−1, one order of magnitude. This behavior is the same for the contact resistance varying from 0.8 m2 K W−1 to 11×10−4 m2 K W−1. For dry PTLs, the thermal conductivity decreases with increasing polytetrafluorethylene (PTFE) content and increases with residual water. These effects are explained by the behavior of air, water, and PTFE in between the PTL fibers. It is also found that Toray papers of differing thickness exhibit different thermal conductivities.
publisherThe American Society of Mechanical Engineers (ASME)
titleThrough-Plane Thermal Conductivity of PEMFC Porous Transport Layers
typeJournal Paper
journal volume8
journal issue2
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4002403
journal fristpage21013
identifier eissn2381-6910
keywordsCompacting
keywordsThermal conductivity
keywordsCarbon
keywordsThickness
keywordsWater
keywordsFibers
keywordsPressure AND Contact resistance
treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record