Show simple item record

contributor authorYoshiaki Matsuo
contributor authorTomokazu Fukutsuka
contributor authorShin-ich Miyano
contributor authorYosohiro Sugie
date accessioned2017-05-09T00:44:38Z
date available2017-05-09T00:44:38Z
date copyrightJune, 2011
date issued2011
identifier issn2381-6872
identifier otherJFCSAU-28948#031008_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146481
description abstractFactors affecting the formation of carbon film by plasma-assisted chemical vapor deposition on stainless steels were investigated in detail. When the carbon coating time increased, the morphology and crystallinity of the formed carbon changed. The depth profile of the resulting carbon coated sample indicated that it was consisted of top carbon layer without metal species and interfacial layer mainly containing chromium oxide and carbon of lower crystallinity. The top carbon layer with the morphology similar to that of carbon nanowall effectively covered the surface of the metal substrate, providing the high electrochemical stability in an acidic solution. As the cold working rate of the stainless steel substrate increases, the time needed for the complete coverage of the metal surface became shorter. Based on the scanning electron microscopy observation and X-ray diffraction, this was mainly ascribed to the increase in defects where the nucleus formation of carbon can occur and the increased density of carbon on the surface of the metal. The resulting carbon coated stainless steels showed low interfacial resistance and high corrosion resistance in acidic solution even at 80°C, and is promising for the bipolar plate of polymer electrolyte fuel cells.
publisherThe American Society of Mechanical Engineers (ASME)
titleFactors Affecting the Formation of Carbon Film on the Stainless Steels for the Bipolar Plate of Polymer Electrolyte Fuel Cells
typeJournal Paper
journal volume8
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4003017
journal fristpage31008
identifier eissn2381-6910
keywordsCoating processes
keywordsCoatings
keywordsCarbon films
keywordsCarbon
keywordsStainless steel
keywordsElectrolytes
keywordsFuel cells
keywordsPolymers AND Metals
treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record