Show simple item record

contributor authorJean-Baptiste Dupont
contributor authorAnna Maria Morgante
contributor authorDominique Legendre
date accessioned2017-05-09T00:44:37Z
date available2017-05-09T00:44:37Z
date copyrightAugust, 2011
date issued2011
identifier issn2381-6872
identifier otherJFCSAU-28949#041008_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146463
description abstractThis work presents direct numerical simulations of two-phase flows in fuel cell minichannels. Different two-phase flow configurations can be observed in such minichannels, which depend on gas-flow rate, liquid holdup, and wettability of each wall. These flows are known to have a significant impact on the fuel cell’s performance. The different two-phase flow configurations must be studied specially concerning the prediction of the transition among them. In the fuel cell minichannels, experimental investigations are difficult to perform because of the small size of the device and the difficult control of the wettability properties of the walls. In such systems, numerical approach can provide useful information with a perfect control of the flow characteristics, particularly for the wettability aspect. The numerical code used in this study is the JADIM code developed at IMFT, which is based on a “volume of fluid” method for interface capturing without any interface reconstruction. The numerical description of the surface tension is one of the crucial points in studying such systems where capillary effects control the phase distribution. The static and the dynamics of the triple line between the liquid, the gas, and the wall is also an essential physical mechanism to consider. The numerical implementation of this model is validated in simple situations where analytical solutions are available for the shape and the pressure jump at the interface. In this paper we present the characteristics of the JADIM code and its potential for the studies of the fuel cell internal flows. Numerical simulations on the two-phase flows on walls, in corners, and inside channels are shown.
publisherThe American Society of Mechanical Engineers (ASME)
titleNumerical Simulation for Two-Phase Flows in Fuel Cell Minichannels
typeJournal Paper
journal volume8
journal issue4
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.3176222
journal fristpage41008
identifier eissn2381-6910
keywordsSurface tension
keywordsFlow (Dynamics)
keywordsFluids
keywordsChannels (Hydraulic engineering)
keywordsComputer simulation
keywordsFuel cells
keywordsTwo-phase flow
keywordsShapes
keywordsDrops
keywordsGas diffusion layers
keywordsWater
keywordsGravity (Force) AND Thickness
treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record