Show simple item record

contributor authorW. A. McPhee
contributor authorL. Bateman
contributor authorM. Koslowske
contributor authorM. Slaney
contributor authorZ. Uzep
contributor authorJ. Bentley
contributor authorT. Tao
date accessioned2017-05-09T00:44:37Z
date available2017-05-09T00:44:37Z
date copyrightAugust, 2011
date issued2011
identifier issn2381-6872
identifier otherJFCSAU-28949#041007_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146462
description abstractA liquid tin anode solid oxide fuel cell (LTA-SOFC) is actively being developed for direct utilization of JP-8 logistic fuel. Since its invention in 1998, the LTA-SOFC has demonstrated the ability to operate on various carbonaceous fuels including hydrocarbons, alcohols, carbon, biomass, and coal without fuel reforming or reprocessing to remove known impurities such as sulfur. Natural gas fueled 1kW stand alone prototypes for distributed power generation and have previously demonstrated over 2000h of continuous operation. The aim is to develop simple and reliable portable power that operates directly off JP-8 and other carbonaceous fuels. The current program focuses on improvement of power density and cell manufacturability. Cell geometry was modified from the previous design to optimize power density while minimizing cell weight and volume. The cell construction is a liquid tin anode housed in a porous separator, an 8mol% yttria stabilized electrolyte, and a strontium doped lanthanum magnate cathode. Experimentation was conducted on single cells at 1000°C. The JP-8 fuel used for experimentation contained a sulfur content of 1400ppm. The direct JP-8 conversion in a LTA-SOFC demonstrated up to 41% efficiency. The LTA-SOFC was also capable of maintaining greater than 30% efficiency at 70% of maximum power output at a JP-8 flow rate of 10μlmin−1. Continuous operation with direct conversion of JP-8 was sustained for over 100h with efficiencies of 41–17%. A maximum power density of 120mWcm−2 was sustainable on a JP-8 flow rate of 50μlmin−1. The current Gen 3.1 cell design can sustain a maximum power of 120mWcm−2 by direct conversion of JP-8 without fuel processing, reforming, or sulfur removal. Efficiencies of up to 41% were sustained for a minimum of 1h, with continuous operation on JP-8 for over 100h. Further performance improvements are anticipated, thereby facilitating LTA-SOFCs use for military and civilian applications that demand flexible fuel.
publisherThe American Society of Mechanical Engineers (ASME)
titleDirect JP-8 Conversion Using a Liquid Tin Anode Solid Oxide Fuel Cell (LTA-SOFC) for Military Applications
typeJournal Paper
journal volume8
journal issue4
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.3005589
journal fristpage41007
identifier eissn2381-6910
keywordsDensity
keywordsWeight (Mass)
keywordsFlow (Dynamics)
keywordsAnodes
keywordsFuels
keywordsDesign
keywordsSolid oxide fuel cells
keywordsSystem efficiency
keywordsDefense industry AND Hydrogen
treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record