Show simple item record

contributor authorSebastian Molin
contributor authorMaria Gazda
contributor authorPiotr Jasinski
contributor authorMateusz Tolczyk
date accessioned2017-05-09T00:44:36Z
date available2017-05-09T00:44:36Z
date copyrightOctober, 2011
date issued2011
identifier issn2381-6872
identifier otherJFCSAU-28950#051019_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146449
description abstractIn this paper composite supports for solid oxide fuel cells were fabricated and evaluated. Substrates were composed of stainless steel and yttria stabilized zirconia (YSZ) powders mixed in different volume ratios. Their sintering behavior (linear shrinkage, resulting porosity) and high temperature properties (oxidation resistance, electrical conductivity) were evaluated. Based on those results the best composition for composite supports was selected and fuel cells were fabricated. Thin YSZ electrolytes were deposited on one side of the support and sintered at 1350 °C in pure hydrogen, while LNF (LaNi0.6 Fe0.4 O3 ) cathodes were deposited on the top of the electrolyte and fired in situ at 800 °C. The fuel cells provided power density of about 80 mWcm-2 at 800 °C. It is worth noting that this performance was achieved without adding any catalytically active phases into composite support, while at the same time the supports exhibited relatively low porosity. This demonstrates that stainless steel can serve as an anode active material. Degradation of this fuel cell was fast (12%/h), nonetheless its performance seems interesting for further investigation.
publisherThe American Society of Mechanical Engineers (ASME)
titleStainless Steel/Yttria Stabilized Zirconia Composite Supported Solid Oxide Fuel Cell
typeJournal Paper
journal volume8
journal issue5
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4003994
journal fristpage51019
identifier eissn2381-6910
keywordsComposite materials
keywordsSteel
keywordsFuel cells
keywordsSolid oxide fuel cells
keywordsoxidation
keywordsStainless steel
keywordsSintering
keywordsPorosity
keywordsElectrolytes
keywordsAnodes
keywordsHydrogen AND Shrinkage (Materials)
treeJournal of Fuel Cell Science and Technology:;2011:;volume( 008 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record