Show simple item record

contributor authorMichael Bishop
contributor authorSerhiy Yarusevych
date accessioned2017-05-09T00:44:14Z
date available2017-05-09T00:44:14Z
date copyrightAugust, 2011
date issued2011
identifier issn0098-2202
identifier otherJFEGA4-27482#081101_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/146292
description abstractThe effect of wall streamlining on flow development over a circular cylinder was investigated experimentally in an adaptive-wall wind tunnel. Experiments were carried out for a Reynolds number of 57,000 and three blockage ratios of 5%, 8%, and 17%. Three test section wall configurations were investigated, namely, geometrically straight walls (GSW), aerodynamically straight walls (ASW), and streamlined walls (SLW). The results show that solid blockage effects are evident in cylinder surface pressure distributions for the GSW and ASW configurations, manifested by an increased peak suction and base suction. Upon streamlining the walls, pressure distributions for each blockage ratio investigated closely match distributions expected for low blockage ratios. Wake blockage limits wake growth in the GSW configuration at 7.75 and 15 diameters downstream of the cylinder for blockages of 17% and 8%, respectively. This adverse effect can be rectified by streamlining the walls, with the resulting wake width development matching that expected for low blockage ratios. Wake vortex shedding frequency and shear layer instability frequency increase in the GSW and ASW configurations with increasing blockage ratio. The observed invariance of the near wake width with wall configuration suggests that the frequency increase is caused by the increased velocity due to solid blockage effects. For all the blockage ratios investigated, this increase is rectified in the SLW configuration, with the resulting Strouhal numbers of about 0.19 matching that expected for low blockage ratios at the corresponding Reynolds number. Blockage effects on the shear layer instability frequency are also successfully mitigated by streamlining the walls.
publisherThe American Society of Mechanical Engineers (ASME)
titleMitigating Blockage Effects on Flow Over a Circular Cylinder in an Adaptive-Wall Wind Tunnel
typeJournal Paper
journal volume133
journal issue8
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.4004421
journal fristpage81101
identifier eissn1528-901X
keywordsPressure
keywordsFlow (Dynamics)
keywordsShear (Mechanics)
keywordsWakes
keywordsCircular cylinders
keywordsCylinders
keywordsWind tunnels
keywordsSuction
keywordsReynolds number AND Uncertainty
treeJournal of Fluids Engineering:;2011:;volume( 133 ):;issue: 008
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record