| description abstract | For more than 1 decade up to now, there is an ongoing interest in small gas turbines downsized to microscale. With their high energy density, they offer a great potential as a substitute for today’s unwieldy accumulators found in a variety of applications such as laptops, small tools, etc. But microscale gas turbines could not only be used for generating electricity, they could also produce thrust for powering small unmanned aerial vehicles or similar devices. Beneath all the great design challenges with the rotating parts of the turbomachinery at this small scale, another crucial item is in fact the combustion chamber needed for a safe and reliable operation. With the so-called regular micromix burning principle for hydrogen successfully downscaled in an initial combustion chamber prototype of 10 kW energy output, this paper describes a new design attempt aimed at the integration possibilities in a μ-scale gas turbine. For manufacturing the combustion chamber completely out of stainless steel components, a recuperative wall cooling was introduced to keep the temperatures in an acceptable range. Also a new way of an integrated ignition was developed. The detailed description of the prototype’s design is followed by an in depth report about the test results. The experimental investigations comprise a set of mass flow variations, coupled with a variation of the equivalence ratio for each mass flow at different inlet temperatures and pressures. With the data obtained by an exhaust gas analysis, a full characterization concerning combustion efficiency and stability of the prototype chamber is possible. Furthermore, the data show full compliance with the expected operating requirements of the designated μ-scale gas turbine. | |
