Show simple item record

contributor authorWilliam F. Northrop
contributor authorJo-Yu Chin
contributor authorDennis N. Assanis
contributor authorStanislav V. Bohac
date accessioned2017-05-09T00:43:29Z
date available2017-05-09T00:43:29Z
date copyrightOctober, 2011
date issued2011
identifier issn1528-8919
identifier otherJETPEZ-27174#102804_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/145930
description abstractPartially premixed low temperature combustion (LTC) is an established advanced engine strategy that enables the simultaneous reduction of soot and NOx emissions in diesel engines. Measuring extremely low levels of soot emissions achievable with LTC modes using a filter smoke meter requires large sample volumes and repeated measurements to achieve the desired data precision and accuracy. Even taking such measures, doubt exists as to whether filter smoke number (FSN) accurately represents the actual smoke emissions emitted from such low soot conditions. The use of alternative fuels such as biodiesel also compounds efforts to accurately report soot emissions since the reflectivity of high levels of organic matter found on the particulate matter collected may result in erroneous readings from the optical detector. Using FSN, it is desired to report mass emissions of soot using empirical correlations derived for use with petroleum diesel fuels and conventional modes of combustion. The work presented in this paper compares the experimental results of well known formulas for calculating the mass of soot using FSN and the elemental carbon mass using thermal optical analysis (TOA) over a range of operating conditions and fuels from a four-cylinder direct-injection passenger car diesel engine. The data show that the mass of soot emitted by the engine can be accurately predicted with the smoke meter method utilizing a 3000 ml sample volume over a range of FSN from 0.02 to 1.5. Soot mass exhaust concentration calculated from FSN using the best of the literature expressions and that from TOA taken over all conditions correlated linearly with a slope of 0.99 and R2 value of 0.94. A primary implication of the work is that the level of confidence in reporting the soot mass based on FSN for low soot formation regimes such as LTC is improved for both petroleum diesel and biodiesel fuels.
publisherThe American Society of Mechanical Engineers (ASME)
titleComparison of Filter Smoke Number and Elemental Carbon Mass From Partially Premixed Low Temperature Combustion in a Direct-Injection Diesel Engine
typeJournal Paper
journal volume133
journal issue10
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4002918
journal fristpage102804
identifier eissn0742-4795
keywordsCombustion
keywordsParticulate matter
keywordsFuels
keywordsEngines
keywordsCarbon
keywordsLow temperature
keywordsDiesel engines
keywordsExhaust systems
keywordsFilters
keywordsSmoke
keywordsSoot
keywordsEmissions
keywordsBiodiesel AND Diesel
treeJournal of Engineering for Gas Turbines and Power:;2011:;volume( 133 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record