Show simple item record

contributor authorEtienne L. Bonnaud
date accessioned2017-05-09T00:43:07Z
date available2017-05-09T00:43:07Z
date copyrightDecember, 2011
date issued2011
identifier issn1528-9044
identifier otherJEPAE4-26319#041013_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/145775
description abstractReliable drop test simulations of electronic packages require reliable material characterization of solder joints. Mechanical properties of lead-free solder were here experimentally investigated for both monotonic and cyclic loading at different strain rates. With regards to the observed complex material behavior, the nonlinear mixed hardening Armstrong and Frederick model combined with the Perzyna viscoplastic law was chosen to fit the experimental data. This model was subsequently implemented into a commercial finite element code and used to simulate drop tests. Actual drop test experiments were conducted in parallel and experimental results were compared to simulations. Prediction discrepancies were analyzed and explanations suggested.
publisherThe American Society of Mechanical Engineers (ASME)
titleIssues on Viscoplastic Characterization of Lead-Free Solder for Drop Test Simulations
typeJournal Paper
journal volume133
journal issue4
journal titleJournal of Electronic Packaging
identifier doi10.1115/1.4005451
journal fristpage41013
identifier eissn1043-7398
keywordsStress
keywordsHardening
keywordsDrops
keywordsEngineering simulation
keywordsLead-free solders
keywordsSolder joints AND Failure
treeJournal of Electronic Packaging:;2011:;volume( 133 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record