Show simple item record

contributor authorY. Janeborvorn
contributor authorE. K. Ungar
contributor authorT. P. Filburn
contributor authorC. C. Yavuzturk
date accessioned2017-05-09T00:40:54Z
date available2017-05-09T00:40:54Z
date copyrightSeptember, 2010
date issued2010
identifier issn1948-5085
identifier otherJTSEBV-28819#031008_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/144830
description abstractHydrophobic, micropore membrane evaporators are studied for use in waste heat rejection in new generation spacesuits developed by the U.S. National Aeronautics and Space Administration (NASA). The waste heat rejection is accomplished via evaporation of liquid water through membrane pores, whereby the hydrophobic membrane allows only water vapor to pass through and retains the liquid phase inside the membrane water channel, allowing the waste heat rejection through the proposed spacesuit water membrane evaporator (SWME) system to be significantly less sensitive to contamination while improving the overall contaminant and system control. Although SWME uses the same heat transport loop as used in current NASA sublimator systems, thus eliminating the need for a separate feedwater system, it permits the system configuration to be simpler and more compact while also eliminating corrosion problems and reducing system freeze-up potential. An improved thermal performance model based on membrane segment energy balances is presented, which is a spacesuit water membrane evaporator for a single circular annulus water channel bounded by two annular vapor channels. The model allows for the investigation of the local heat transfer characteristics along the annulus including temperature gradients in the membrane wall and the water channel using a steady-state approach. The model also accounts for the effects of thermal and hydraulic entry lengths, far field radiation, and energy carried away by the mass of water evaporation. The local heat transfer analysis enables the straightforward calculation of the overall magnitude of heat transfer from the SWME. A model validation is presented via the sum of the squares error analyses between the model predictions and the experimental results.
publisherThe American Society of Mechanical Engineers (ASME)
titleThermal Performance Model for Spacesuit Waste Heat Rejection Using Water Membrane Evaporators
typeJournal Paper
journal volume2
journal issue3
journal titleJournal of Thermal Science and Engineering Applications
identifier doi10.1115/1.4003011
journal fristpage31008
identifier eissn1948-5093
keywordsHeat
keywordsTemperature
keywordsMembranes
keywordsWater
keywordsVapors
keywordsWaste heat
keywordsChannels (Hydraulic engineering)
keywordsFlow (Dynamics) AND Evaporation
treeJournal of Thermal Science and Engineering Applications:;2010:;volume( 002 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record