Show simple item record

contributor authorGeorge C. Bandlamudi
contributor authorM. Saborni
contributor authorP. Beckhaus
contributor authorF. Mahlendorf
contributor authorA. Heinzel
date accessioned2017-05-09T00:38:41Z
date available2017-05-09T00:38:41Z
date copyrightFebruary, 2010
date issued2010
identifier issn2381-6872
identifier otherJFCSAU-28940#014501_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143703
description abstractHigh temperature polymer electrolyte membrane fuel cells (HT PEMFCs) offer tremendous flexibility when used as energy converters in stationary as well as mobile power devices. Coupling HT PEMFC stacks with fuel processors that use liquid as well as gaseous fuels to generate hydrogen rich gas is a promising prospect, which paves the way for a possible hydrogen economy. The current paper deals with the performance aspects of a 150 Wel HT PEMFC stack, which potentially could be coupled to (i) a natural gas reformer, (ii) a propane reformer, or (iii) a methanol reformer. A 12 cell HT PEMFC stack with a total active area of about 600 cm2 was operated in a test rack, and the results show that HT PEMFCs are principally suited for operation with reformates.
publisherThe American Society of Mechanical Engineers (ASME)
titlePBI/H3PO4 Gel Based Polymer Electrolyte Membrane Fuel Cells Under the Influence of Reformates
typeJournal Paper
journal volume7
journal issue1
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.3119054
journal fristpage14501
identifier eissn2381-6910
keywordsGaseous fuels
keywordsFuels
keywordsProton exchange membrane fuel cells
keywordsMethanol AND Natural gas
treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record