Show simple item record

contributor authorHeli Wang
contributor authorGlenn Teeter
contributor authorJohn A. Turner
date accessioned2017-05-09T00:38:35Z
date available2017-05-09T00:38:35Z
date copyrightApril, 2010
date issued2010
identifier issn2381-6872
identifier otherJFCSAU-28941#021019_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143669
description abstractAustenitic 349 stainless steel was nitrided in an NH3 plasma. A low interfacial contact resistance was obtained with the nitrided steel. Glancing angle X-ray diffraction suggests that the nitrided layer is very thin and possibly amorphous. X-ray photoelectron spectroscopy (XPS) studies show that the nitrided layer is composed of mixed oxides and nitrides of Fe3+ and Cr3+. Contaminations of V and Sn were also observed, though their influence on the as-nitrided surface conductivity is not clear. The nitrided samples were investigated in a simulated polymer electrolyte membrane fuel cell (PEMFC) environment, and showed excellent corrosion resistance. The XPS depth profile indicated that the passive film, which formed on the plasma-nitrided steel in the PEMFC anode environment, is composed of mixed oxides and nitrides, in which chromium oxide/nitride dominates the surface chemistry. No V or Sn was detected on the surface after the polarization tests. For the PEMFC bipolar plate application, nitridation in NH3 plasma is a promising surface treatment approach, though more research is needed to investigate the influence of the plasma density and substrate bias on the surface conductivity and performance of the nitrided steel in PEMFC environments.
publisherThe American Society of Mechanical Engineers (ASME)
titlePlasma Nitrided Type 349 Stainless Steel for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate—Part II: Nitrided in Ammonia Plasma
typeJournal Paper
journal volume7
journal issue2
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.3178640
journal fristpage21019
identifier eissn2381-6910
keywordsPolarization (Electricity)
keywordsPlasmas (Ionized gases)
keywordsProton exchange membrane fuel cells
keywordsStainless steel
keywordsNitrogen AND Anodes
treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record