Show simple item record

contributor authorA. Alan Burke
contributor authorLouis G. Carreiro
contributor authorR. Craig Urian
date accessioned2017-05-09T00:38:32Z
date available2017-05-09T00:38:32Z
date copyrightJune, 2010
date issued2010
identifier issn2381-6872
identifier otherJFCSAU-28942#034502_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143648
description abstractPreliminary results indicate that acetylene and hydrogen peroxide are viable reactants for a solid oxide fuel cell (SOFC) system. Acetylene was hydrogenated and reformed to a suitable feed at the anode while hydrogen peroxide was decomposed to provide oxygen to the cathode. Roughly 45% fuel and oxidant utilization were demonstrated on a SOFC stack manufactured by Delphi Corporation (Troy, MI). These reactants offer high energy storage as well as an entirely self-contained power system with no exhaust streams. Such attributes are favorable for undersea vehicles and perhaps other applications that require a self-contained or air-independent power system.
publisherThe American Society of Mechanical Engineers (ASME)
titleResults Using Processed Acetylene Fuel Stream in Solid Oxide Fuel Cell Stack
typeJournal Paper
journal volume7
journal issue3
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.3211102
journal fristpage34502
identifier eissn2381-6910
keywordsFuels
keywordsSolid oxide fuel cells
keywordsHydrogen AND Flow (Dynamics)
treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record