Show simple item record

contributor authorAntonin Faes
contributor authorHenrik Lund Frandsen
contributor authorDarlene R. Goldstein
contributor authorMikko Pihlatie
contributor authorAndreas Kaiser
date accessioned2017-05-09T00:38:25Z
date available2017-05-09T00:38:25Z
date copyrightOctober, 2010
date issued2010
identifier issn2381-6872
identifier otherJFCSAU-28944#051011_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143590
description abstractOne of the main drawbacks of anode-supported solid oxide fuel cell technology is the limited capability to withstand reduction and oxidation (“RedOx”) of the Ni phase. This study compares the effect of RedOx cycles on curvature and strength of half-cells, composed of a nickel-yttria-stabilized-zirconia (Ni-YSZ) support, a Ni-YSZ anode, and an 8YSZ electrolyte. Five different treatments are studied: (i) reduction at 600°C, (ii) reduction at 1000°C, (iii) 1RedOx cycle at 750°C, (iv) 5RedOx cycles at 750°C, and (v) 5RedOx cycles at 600°C. The strength is measured by the ball-on-ring method, where it is calculated analytically from the force. In this calculation the thermal stresses are estimated from the curvature of the half-cell. For each treatment, more than 30 samples are tested. About 20 ball-on-ring samples are laser cut from one original 12×12 cm2 half-cell. Curvature and porosity are measured for each sample before and after RedOx treatments. The first observations show that increasing the reduction temperature enhance strength but does not influence the curvature, whereas 1RedOx cycle at 750°C increases the curvature without changing the strength. Consecutive RedOx cycles seem to decrease anode-supported cell strength but this is coupled to lower porosity of the tested samples.
publisherThe American Society of Mechanical Engineers (ASME)
titleCurvature and Strength of Ni-YSZ Solid Oxide Half-Cells After Redox Treatments
typeJournal Paper
journal volume7
journal issue5
journal titleJournal of Fuel Cell Science and Technology
identifier doi10.1115/1.4001019
journal fristpage51011
identifier eissn2381-6910
keywordsTemperature
keywordsAnodes
keywordsMeasurement
keywordsSolid oxide fuel cells
keywordsCycles
keywordsElectrolytes
keywordsPorosity
keywordsStress
keywordsNickel
keywordsThickness AND oxidation
treeJournal of Fuel Cell Science and Technology:;2010:;volume( 007 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record