Show simple item record

contributor authorKideok Ro
date accessioned2017-05-09T00:38:17Z
date available2017-05-09T00:38:17Z
date copyrightApril, 2010
date issued2010
identifier issn0098-2202
identifier otherJFEGA4-27414#041101_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/143505
description abstractThis study was conducted in an attempt to improve the hydrodynamic performance of a Weis-Fogh type ship propulsion mechanism by installing a spring to the wing so that the opening angle of the wing can be changed automatically. With the prototype design, the average thrust coefficient was almost fixed with all velocity ratios; but with the spring type, the thrust coefficient was increased sharply as the velocity ratio increased. The average propulsive efficiency was higher with a bigger opening angle in the prototype but in the spring type design, the one with a smaller spring coefficient had higher efficiency. In the case of velocity ratios over 1.5 where big thrust can be generated, the spring type had more than twice the increase in propulsion efficiency compared with the prototype.
publisherThe American Society of Mechanical Engineers (ASME)
titlePerformance Improvement of Weis-Fogh Type Ship’s Propulsion Mechanism Using a Wing Restrained by an Elastic Spring
typeJournal Paper
journal volume132
journal issue4
journal titleJournal of Fluids Engineering
identifier doi10.1115/1.4001155
journal fristpage41101
identifier eissn1528-901X
keywordsDrag (Fluid dynamics)
keywordsThrust
keywordsPropulsion
keywordsSprings
keywordsWings
keywordsMechanisms AND Engineering prototypes
treeJournal of Fluids Engineering:;2010:;volume( 132 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record