| contributor author | Ajit K. Roy | |
| contributor author | Joydeep Pal | |
| contributor author | Muhammad H. Hasan | |
| date accessioned | 2017-05-09T00:37:59Z | |
| date available | 2017-05-09T00:37:59Z | |
| date copyright | January, 2010 | |
| date issued | 2010 | |
| identifier issn | 0094-4289 | |
| identifier other | JEMTA8-27124#011001_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/143364 | |
| description abstract | The role of temperature and load ratio (R) on the crack propagation rate (da/dN) of Alloys 276 and 617 under cyclic loading was investigated. The results indicate that the rate of cracking was gradually enhanced with increasing temperature when the R value was kept constant. However, the temperature effect was more pronounced at 100–150°C. Both alloys exhibited maximum da/dN values at a load range of 4.5 kN that corresponds to an R value of 0.1. The number of cycles to failure for Alloy 276 was relatively higher compared with that of Alloy 617, indicating its slower crack-growth rate. Fractographic evaluation of the broken specimen surface revealed combined fatigue and ductile failures. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Temperature and Load Ratio Effects on Crack-Growth Behavior of Austenitic Superalloys | |
| type | Journal Paper | |
| journal volume | 132 | |
| journal issue | 1 | |
| journal title | Journal of Engineering Materials and Technology | |
| identifier doi | 10.1115/1.3184027 | |
| journal fristpage | 11001 | |
| identifier eissn | 1528-8889 | |
| keywords | Temperature | |
| keywords | Alloys | |
| keywords | Stress | |
| keywords | Fracture (Materials) | |
| keywords | Superalloys | |
| keywords | Crack propagation AND Testing | |
| tree | Journal of Engineering Materials and Technology:;2010:;volume( 132 ):;issue: 001 | |
| contenttype | Fulltext | |
