Effect of Phase Transformation on the Wear Behavior of NiTi Alloy

Abstract

In this paper, mechanical and tribological properties of a Ti-50.3 at % Ni alloy were investigated. The transformation temperatures of the alloy were determined using differential scanning calorimetry. Three-point bending tests were performed to characterize the pseudoelasticity and shape memory effects. Uni-axial compression tests were also performed at different testing temperatures. The wear tests were conducted using a pin-on-disk tribometer at testing temperatures ranging from 0°C to 80°C. The wear results showed that with increasing the testing temperature from 0°C to 50°C, the wear of the alloy was decreased, which could be attributed to the higher pseudoelasticity of the alloy at a testing temperature of 50°C. The pseudoelasticity of the alloy decreased at a higher testing temperature of 80°C; however, its wear resistance increased considerably due to higher ultimate strength and work hardening.