Show simple item record

contributor authorSudhaker Chhabra
contributor authorAjay K. Prasad
date accessioned2017-05-09T00:36:38Z
date available2017-05-09T00:36:38Z
date copyrightMay, 2010
date issued2010
identifier issn0148-0731
identifier otherJBENDY-27136#051009_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/142625
description abstractThe alveoli are the smallest units of the lung that participate in gas exchange. Although gas transport is governed primarily by diffusion due to the small length scales associated with the acinar region (∼500 μm), the transport and deposition of inhaled aerosol particles are influenced by convective airflow patterns. Therefore, understanding alveolar fluid flow and mixing is a necessary first step toward predicting aerosol transport and deposition in the human acinar region. In this study, flow patterns and particle transport have been measured using a simplified in-vitro alveolar model consisting of a single alveolus located on a bronchiole. The model comprises a transparent elastic 5/6 spherical cap (representing the alveolus) mounted over a circular hole on the side of a rigid circular tube (representing the bronchiole). The alveolus is capable of expanding and contracting in phase with the oscillatory flow through the tube. Realistic breathing conditions were achieved by exercising the model at physiologically relevant Reynolds and Womersley numbers. Particle image velocimetry was used to measure the resulting flow patterns in the alveolus. Data were acquired for five cases obtained as combinations of the alveolar-wall motion (nondeforming/oscillating) and the bronchiole flow (none/steady/oscillating). Detailed vector maps at discrete points within a given cycle revealed flow patterns, and transport and mixing of bronchiole fluid into the alveolar cavity. The time-dependent velocity vector fields were integrated over multiple cycles to estimate particle transport into the alveolar cavity and deposition on the alveolar wall. The key outcome of the study is that alveolar-wall motion enhances mixing between the bronchiole and the alveolar fluid. Particle transport and deposition into the alveolar cavity are maximized when the alveolar wall oscillates in tandem with the bronchiole fluid, which is the operating case in the human lung.
publisherThe American Society of Mechanical Engineers (ASME)
titleFlow and Particle Dispersion in a Pulmonary Alveolus—Part I: Velocity Measurements and Convective Particle Transport
typeJournal Paper
journal volume132
journal issue5
journal titleJournal of Biomechanical Engineering
identifier doi10.1115/1.4001112
journal fristpage51009
identifier eissn1528-8951
keywordsFlow (Dynamics)
keywordsParticulate matter
keywordsCycles
keywordsCavities AND Motion
treeJournal of Biomechanical Engineering:;2010:;volume( 132 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record