Show simple item record

contributor authorM. Sreekumar
contributor authorT. Nagarajan
contributor authorM. Singaperumal
date accessioned2017-05-09T00:34:22Z
date available2017-05-09T00:34:22Z
date copyrightJune, 2009
date issued2009
identifier issn1050-0472
identifier otherJMDEDB-27901#061008_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/141376
description abstractLarge displacement static analysis of a fully compliant spatial mechanism is presented here. This mechanism is made up of a superelastic nitinol pipe as its compliant structural member and actuated by three shape memory alloy (SMA) wires. The coupled effect of the force developed by the SMA actuation and the force required for elastica deflection is simplified by incorporating the geometric parameters of the mechanism using a deflection plane approach. An iterative algorithm with elliptical integration has been developed, which is suitable for a wider range of actual and arbitrary inputs. The solutions are obtained for the effect of one-wire and two-wire actuation methods. Results obtained from the deflection plane approach and simulation have been compared and found that the relative error is less than 1% within the safe operating range of 5% strain value recommended for SMA actuators. Based on the analytical and simulation inputs, the mechanism is miniaturized further with the aim of increasing its workspace and is fabricated for further experimental investigations.
publisherThe American Society of Mechanical Engineers (ASME)
titleDesign of a Shape Memory Alloy Actuated Compliant Smart Structure: Elastica Approach
typeJournal Paper
journal volume131
journal issue6
journal titleJournal of Mechanical Design
identifier doi10.1115/1.3125202
journal fristpage61008
identifier eissn1528-9001
keywordsForce
keywordsWire
keywordsDeflection AND Mechanisms
treeJournal of Mechanical Design:;2009:;volume( 131 ):;issue: 006
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record