Show simple item record

contributor authorThomas Georges
contributor authorVladimir Brailovski
contributor authorEmeric Morellon
contributor authorDaniel Coutu
contributor authorPatrick Terriault
date accessioned2017-05-09T00:34:16Z
date available2017-05-09T00:34:16Z
date copyrightSeptember, 2009
date issued2009
identifier issn1050-0472
identifier otherJMDEDB-27907#091006_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/141328
description abstractAn active structure of a morphing wing designed for subsonic cruise flight conditions is composed of three principal subsystems: (1) flexible extrados, (2) rigid intrados, and (3) an actuator group located inside the wing box. The four-ply laminated composite flexible extrados is powered by two individually controlled shape memory alloy (SMA) actuators. Fulfilling the requirements imposed by the morphing wing application to the force-displacement characteristics of the actuators, a novel design methodology to determine the geometry of the SMA active elements and their adequate assembly conditions is presented. This methodology uses the results of the constrained recovery testing of the selected SMA. Using a prototype of the morphing laminar wing powered by SMA actuators, the design approach proposed in this study is experimentally validated.
publisherThe American Society of Mechanical Engineers (ASME)
titleDesign of Shape Memory Alloy Actuators for Morphing Laminar Wing With Flexible Extrados
typeJournal Paper
journal volume131
journal issue9
journal titleJournal of Mechanical Design
identifier doi10.1115/1.3160310
journal fristpage91006
identifier eissn1528-9001
keywordsActuators
keywordsDesign
keywordsForce
keywordsStress
keywordsWings
keywordsDisplacement AND Testing
treeJournal of Mechanical Design:;2009:;volume( 131 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record