Show simple item record

contributor authorChanat Ratanasumawong
contributor authorShigeki Matsumura
contributor authorTetsuo Tatsuno
contributor authorHaruo Houjoh
date accessioned2017-05-09T00:34:15Z
date available2017-05-09T00:34:15Z
date copyrightOctober, 2009
date issued2009
identifier issn1050-0472
identifier otherJMDEDB-27909#101003_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/141312
description abstractTooth surface measurement is an important way to verify the quality of produced gears. To reduce inspection time and cost, only a few tooth profiles and traces on some teeth are inspected. Measured data are not likely representatives of all gear teeth because errors may occur in assembly procedure and affect tooth contact condition. Frequently, tooth surface measuring data cannot show contact condition and used to predict gear vibration accurately. Field inspection method whose measured results relate directly to the meshing condition is required. This paper derives the relationship between meshing vibration components and the common gear tooth surface geometries of helical gears. The tooth surface geometries considered here are lead crowning, profile convex, pressure angle error, and bias-in modification. The polar plot representation, which plots meshing components in a complex plane, is proposed here to distinguish vibration characteristics of gears with various tooth surface forms. It is found that the vector of the second order of meshing component is valuable for classifying the type of tooth surface geometry.
publisherThe American Society of Mechanical Engineers (ASME)
titleEstimating Gear Tooth Surface Geometry by Means of the Vibration Measurement: Distinction of the Vibration Characteristics of Gears With Tooth Surface Form Error
typeJournal Paper
journal volume131
journal issue10
journal titleJournal of Mechanical Design
identifier doi10.1115/1.3184692
journal fristpage101003
identifier eissn1528-9001
keywordsGears
keywordsVibration
keywordsErrors
keywordsGeometry
keywordsGear teeth AND Pressure
treeJournal of Mechanical Design:;2009:;volume( 131 ):;issue: 010
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record